196 research outputs found

    Ultrasonic attenuation measurements at very high SNR: correlation, information theory and performance

    Get PDF
    This paper describes a system for ultrasonic wave attenuation measurements which is based on pseudo-random binary codes as transmission signals combined with on-the-fly correlation for received signal detection. The apparatus can receive signals in the nanovolt range against a noise background in the order of hundreds of microvolts and an analogue to digital convertor (ADC) bit-step also in the order of hundreds of microvolts. Very high signal to noise ratios (SNRs) are achieved without recourse to coherent averaging with its associated requirement for high sampling times. The system works by a process of dithering – in which very low amplitude received signals enter the dynamic range of the ADC by 'riding' on electronic noise at the system input. The amplitude of this 'useful noise' has to be chosen with care for an optimised design. The process of optimisation is explained on the basis of classical information theory and is achieved through a simple noise model. The performance of the system is examined for different transmitted code lengths and gain settings in the receiver chain. Experimental results are shown to verify the expected operation when the system is applied to a very highly attenuating material – an aerated slurry

    Readout for intersatellite laser interferometry: Measuring low frequency phase fluctuations of HF signals with microradian precision

    Full text link
    Precision phase readout of optical beat note signals is one of the core techniques required for intersatellite laser interferometry. Future space based gravitational wave detectors like eLISA require such a readout over a wide range of MHz frequencies, due to orbit induced Doppler shifts, with a precision in the order of μrad/Hz\mu \textrm{rad}/\sqrt{\textrm{Hz}} at frequencies between 0.1mHz0.1\,\textrm{mHz} and 1Hz1\,\textrm{Hz}. In this paper, we present phase readout systems, so-called phasemeters, that are able to achieve such precisions and we discuss various means that have been employed to reduce noise in the analogue circuit domain and during digitisation. We also discuss the influence of some non-linear noise sources in the analogue domain of such phasemeters. And finally, we present the performance that was achieved during testing of the elegant breadboard model of the LISA phasemeter, that was developed in the scope of an ESA technology development activity.Comment: submitted to Review of Scientific Instruments on April 30th 201

    Towards whole genome association genetic scans in barley

    Get PDF
    In crop plants, the potential of association mapping, with the objective of estimating the position of genes conferring a specific trait or phenotype using linkage disequilibrium (LD) between alleles of genetically mapped markers, has recently become a focus of considerable interest. One major attraction of association genetics is the potential to locate genes responsible for a wide range of traits in a single sample population using pre-existing phenotypic data that has been collected during crop improvement and cultivar registration programs. This study testify to the potential of exploiting whole genome LD-scans to locate genes controlling key biological traits in cultivated barley. We are currently increasing the density of markers, particularly those with a MAF >0.1, by developing two further pilot OPAs, which in due course will be compressed into two commercially available platforms for high throughput low cost genotyping in cultivated barley. In the immediate future these will be used in large association genetic studies in the UK and US involving approximately 4000 barley genotypes with the aim of realising the potential for whole genome association genetic scans in cultivated barley

    Segmentation of plate coupling, fate of subduction fluids, and modes of arc magmatism in Cascadia, inferred from magnetotelluric resistivity

    Get PDF
    Author Posting. © American Geophysical Union, 2014. This article is posted here by permission of American Geophysical Union for personal use, not for redistribution. The definitive version was published in Geochemistry, Geophysics, Geosystems 15 (2014): 4230–4253, doi:10.1002/2014GC005509.Five magnetotelluric (MT) profiles have been acquired across the Cascadia subduction system and transformed using 2-D and 3-D nonlinear inversion to yield electrical resistivity cross sections to depths of ∼200 km. Distinct changes in plate coupling, subduction fluid evolution, and modes of arc magmatism along the length of Cascadia are clearly expressed in the resistivity structure. Relatively high resistivities under the coasts of northern and southern Cascadia correlate with elevated degrees of inferred plate locking, and suggest fluid- and sediment-deficient conditions. In contrast, the north-central Oregon coastal structure is quite conductive from the plate interface to shallow depths offshore, correlating with poor plate locking and the possible presence of subducted sediments. Low-resistivity fluidized zones develop at slab depths of 35–40 km starting ∼100 km west of the arc on all profiles, and are interpreted to represent prograde metamorphic fluid release from the subducting slab. The fluids rise to forearc Moho levels, and sometimes shallower, as the arc is approached. The zones begin close to clusters of low-frequency earthquakes, suggesting fluid controls on the transition to steady sliding. Under the northern and southern Cascadia arc segments, low upper mantle resistivities are consistent with flux melting above the slab plus possible deep convective backarc upwelling toward the arc. In central Cascadia, extensional deformation is interpreted to segregate upper mantle melts leading to underplating and low resistivities at Moho to lower crustal levels below the arc and nearby backarc. The low- to high-temperature mantle wedge transition lies slightly trenchward of the arc.Phil Wannamaker and Virginie Maris gratefully acknowledge funding by the U.S. National Science Foundation under grants EAR08–43725 and EAR08–38043 through the Earthscope and Geophysics programs. The 2D inversion capability received development support under U.S. Department of Energy contract DE-PS36-04GO94001. Rob Evans was supported through Earthscope grant EAR08–44041 and Shane McGary through a National Defense Science and Engineering Graduate (NDSEG) fellowship. Fieldwork in Canada was made possible by an NSERC Discovery Grant and a Canadian Foundation for Innovation award to Martyn Unsworth.2015-05-1

    Implementacija digitalnog generatora obojenog šuma bez množila

    Get PDF
    Colored noise can be generated by filtering of the white noise. It is a simple task. However, it becomes challenging if high operating speed of the generator is required. The realization of digital filter generally requires one multiplication per coefficient. Therefore, a high operating speed is achieved only with the cost of several generalpurpose multipliers. In this paper, a multiplierless realization of the colored noise generator is proposed. It is based on the filtering of 1-bit random signal by a finite impulse response filter. The design of the generator is described and its implementation is considered. Furthermore, an application is described in which the proposed generator is used in mitigation of undesired effects caused by nonlinearities in an analog to digital converter.Obojeni šum može se generirati filtriranjem bijelog šuma. To je jednostavan postupak. Međutim, on postaje izazovan ako se od generatora traži velika brzina rada. Realizacija digitalnog filtra u pravilu zahtijeva jedno množenje po koeficijentu. Zato se velika brzina rada može postići samo uz cijenu većeg broja množila opće namjene. U ovom radu predložena je realizacija generatora obojenog šuma koja ne sadrži množila. Ona se temelji se na filtraciji 1-bitnog slučajnog signala pomoću filtra s konačnim impulsnim odzivom. Opisano je projektiranje generatora te je razmotrena njegova implementacija. Nadalje, opisana je primjena u kojoj je predloženi generator iskorišten za smanjivanje utjecaja nelinearnosti u analogno digitalnom pretvorniku

    DNase Sda1 Allows Invasive M1T1 Group A Streptococcus to Prevent TLR9-Dependent Recognition

    Get PDF
    Group A Streptococcus (GAS) has developed a broad arsenal of virulence factors that serve to circumvent host defense mechanisms. The virulence factor DNase Sda1 of the hyperinvasive M1T1 GAS clone degrades DNA-based neutrophil extracellular traps allowing GAS to escape extracellular killing. TLR9 is activated by unmethylated CpG-rich bacterial DNA and enhances innate immune resistance. We hypothesized that Sda1 degradation of bacterial DNA could alter TLR9-mediated recognition of GAS by host innate immune cells. We tested this hypothesis using a dual approach: loss and gain of function of DNase in isogenic GAS strains and presence and absence of TLR9 in the host. Either DNA degradation by Sda1 or host deficiency of TLR9 prevented GAS induced IFN-α and TNF-α secretion from murine macrophages and contributed to bacterial survival. Similarly, in a murine necrotizing fasciitis model, IFN-α and TNF-α levels were significantly decreased in wild type mice infected with GAS expressing Sda1, whereas no such Sda1-dependent effect was seen in a TLR9-deficient background. Thus GAS Sda1 suppressed both the TLR9-mediated innate immune response and macrophage bactericidal activity. Our results demonstrate a novel mechanism of bacterial innate immune evasion based on autodegradation of CpG-rich DNA by a bacterial DNase

    Evidence of stochastic resonance in the mating behavior of Nezara viridula (L.)

    Get PDF
    We investigate the role of the noise in the mating behavior between individuals of Nezara viridula (L.), by analyzing the temporal and spectral features of the non-pulsed type female calling song emitted by single individuals. We have measured the threshold level for the signal detection, by performing experiments with the calling signal at different intensities and analyzing the insect response by directionality tests performed on a group of male individuals. By using a sub-threshold signal and an acoustic Gaussian noise source, we have investigated the insect response for different levels of noise, finding behavioral activation for suitable noise intensities. In particular, the percentage of insects which react to the sub-threshold signal, shows a non-monotonic behavior, characterized by the presence of a maximum, for increasing levels of the noise intensity. This constructive interplay between external noise and calling signal is the signature of the non-dynamical stochastic resonance phenomenon. Finally, we describe the behavioral activation statistics by a soft threshold model which shows stochastic resonance. We find that the maximum of the ensemble average of the input-output cross-correlation occurs at a value of the noise intensity very close to that for which the behavioral response has a maximum.Comment: 6 pages, 4 figures, to appear in EPJ B (2008

    Inference of Antibiotic Resistance and Virulence among Diverse Group A Streptococcus Strains Using emm Sequencing and Multilocus Genotyping Methods

    Get PDF
    typing (direct sequencing of the genomic segment coding for the antigenic portion of the M protein) or by multilocus genotyping methods. Phenotype analysis, including critical AbR typing, is generally achieved by much slower and more laborious direct culture-based methods. type and the associated AbR and virulence phenotypes. types
    corecore